220V EU Heat gun for embossing hair dryer heat gun for home DIY

Feature-Temperature Adjustable

1. The adjustable temperature range of this heat gun is from 60℃to 650℃(Push the sliding switch right or left to adjust the temperature).

2. There are 2 steps to limit the temperature, when the main switch at first gear(I), the adjustable temperature range is from 60℃ to 400℃. when the main switch at second gear(II), the adjustable temperature range is from 60℃ to 650℃.

Safe Design

1. In order to make sure the heat gun works safely, we have designed special overload protection for each product, to prevent from resulting in a fire or hazard because of excessive temperature.

2. It is normal that it exists light smoking or pungent smell when you use it at the first time, it will disappear in a few minutes.

Attention

1. when using the highest temperature or near the highest temperature, please avoid using the small nozzle and put too close to the intended object. Otherwise, it may lead to activating the overload protection system.
2. When you use the heat gun for the first time, the heating element will have smoke, along with a pungent smell together. It is normal, and it won’t reappear in a few minutes. It is because of the impurities in the mica sheet and the vaporization of metal oil in the heating wire.
3. Do not use the heat gun as a hairdryer.
4. Do not blow the heat gun directly at people or animals.
5. Do not use it near flammable or explosive gases.
6. Do not block or cover the hot air inlet and outlet.
7. When the heat gun is in use or just after use, do not touch the nozzle.
8. The handle of the heat gun must be kept dry.
9. the hot air gun must be completely cooled before being stored.